Restoring The Router To Default Settings Using The Web Interface - Belkin AC1000 DB User Manual

UsInG YOUR ROUTeR
Restoring the Router to default settings
Using the Web Interface
symptoms
3. Click "Login" in the upper right-hand corner of the page. The
You need to restore the factory defaults using the web interface.
Router does not ship with a password, so just click "Submit".
This may be because the Router is not performing as expected
or you wish to remove all previously configured settings.
setup steps
1. Open a web browser on the computer.
2. In the address bar of the web browser, type "http://192.168.2.1".
43