Getting To Know Your Router; Router; Front Panel - Belkin AC1000 DB User Manual

GeTTInG TO KnOW YOUR ROUTeR

Router

front Panel

A
B
a) Router status light
Your Router's status is shown by the light on the front .
Off: The Router is not plugged into Power Modem's
power source.
blinking blue: The Router is starting up.
solid blue: The Router is connected to the Internet.
blinking amber: The Router can't detect the Power Modem.
Either the Power Modem is unresponsive, or the ADSL (RJ11) cable
is not plugged into the Power Modem, or there is no signal.
b) Wi-fi Protected setup (WPs) light and button
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers. To use
the WPS feature on your Router, see "Getting Started > Adding
Computers to Your Network > Using the WPS Button ".
The small light near the WPS button shows what is happening
while you are using WPS to establish a connection .
Off: Idle
blinking blue: The Router is listening for a WPS-enabled
computer or other device.
solid blue: The Router has made a secure connection
with the computer or other device.
amber: A connection was not created.
30