What's In The Box; Dc-Mp3 Firmware Versions - Light O Rama DC-MP3 User Manual

What's in the Box

Your DC-MP3 includes a USB SD card reader/writer,
a 128 MB (or larger) SD card and a user's manual.
This manual is also available at
► Support ► DC-MP3 User's Manual.
If you purchased an LOR1602MP3, which is a 16
channel lighting controller with an internal DC-MP3.
The DC-MP3 is mounted on a plate inside the
controller. Remove the bottom two screws from the
front cover and lift off the cover to expose the DC-
MP3. See the following picture:
Page 5
DC-MP3
www.lightorama.com
DC-MP3

DC-MP3 Firmware Versions

Firmware Determining
Version Version
E, R & C LEDs do
not chase when
1.0
the DC-MP3 is
powered up, the
LEDs just flash
E, R & C LEDs
chase three times
2.0
when the DC-MP3
is powered up
E, R & C LEDs
chase four times
3.0
when the DC-MP3
is powered up
If the firmware version in your DC-MP3 does not
support show scheduling, you will have to check the
Old Firmware box on the LOR MP3 tab when using
the Hardware Utility to build your shows. You will not
be able to use the DC-MP3's real time clock to
schedule shows. If you want to use the scheduling
features, you must update the firmware in your DC-
MP3 to at least 2.0. See the Updating DC-MP3
Firmware section for instructions.
If the firmware version in your DC-MP3 does not
support trigger inputs, and you want to use the
interactive features, you must update the firmware in
your DC-MP3 to 3.0. See the section Updating DC-
MP3 Firmware for instructions.
I
Page 6
Scheduling Interactive
Supported Supported
No No
Yes No
Yes Yes