Table of Contents
Advertisement
If you select Play During Scheduled Time then the
Set Show Options window will pop up. You can get
this window back later to make additional changes
by clicking the Schedule button. The Set Show
Options window follows:
These are the default scheduling parameters. Click
the boxes next to any days for which you wish to
change the start/end times. Use the Start Hour/Min
and End Hour/Min sections to select the times you
want. Click the Change Selected Days button to
change the start/end times for the selected days.
To prevent the show from running on a particular
day set the Start Hour/Min and the End Hour/Min to
the same value.
To have shows run back to back, set the start time of
the second show to the end time of the first show.
When you are satisfied with your schedule, click the
OK button,
Page 35
DC-MP3
DC-MP3
Use the Select How Show Plays section to choose
how the show will play during the scheduled time
periods. If you select...
• Loop though Showlist continuously –
Sequences in the Showlist play in order and
repeat continuously from the start time until
the end time.
• Play through Showlist one time only –
Sequences in the Showlist play in order one
time unless the time period is less than the
Showlist length.
• Play show once per hour or ½ hour –
Sequences in the Showlist play once per hour
or half-hour.
If you select either of Play through Showlist one time
only or Play show once per hour or ½ hour, then
you must choose what to do while the Showlist is not
playing during the scheduled time period. Use the
Action to take between shows section to select one
of:
• Lights On – all lights will be on between
shows
• Lights Off – all lights will be off between
shows
• Filler Seq – runs this sequence between
shows. This can only be an animation
sequence. Click the Select Filler Sequence
button to pick an animation sequence to use
between playing the Showlist sequences.
Use the MP3 Player Showlist section to add
sequences to the show:
Page 36
Advertisement
Table of Contents
