Table of Contents
Advertisement
• No SD card in the DC-MP3
• The DC-MP3 powered (see the Power Input
section) and connected to the PC via one of
the RS485 adapters – Do not use wireless
Get the latest firmware.
www.lightorama.com
Support ► Using the Hardware – Documentation
and Firmware section. Click the Firmware button in
the DC-MP3 line and run the firmware installer. Note
the name of the firmware .lhx file. The normal
location of firmware files is C:\Program Files\Light-O-
Rama\Firmware.
Start the LightORama Control Panel if it is not
running by clicking start ► All Programs ►
LightORama ► Light-O-Rama Control Panel. The
Light-O-Rama light bulb icon will appear in the
system tray on the lower right of your screen.
Start the Hardware Utility by right-clicking the Light-
O-Rama Control Panel light bulb and selecting
Hardware Utility from the menu.
Click the Firmware button in the LOR Control tab
and you will see this window:
Page 47
DC-MP3
►
DC-MP3
In Step 1 – Select Unit, choose the MP3 Player
radio button.
In Step 2 – Select firmware file, click the Open
button. You may see this window:
Note the instructions in the box and click OK. Click
the Open button again if necessary to get the Open
file box.
Page 48
Advertisement
Table of Contents
