Adding Sequences To The Show - Light O Rama DC-MP3 User Manual

Notice that two new option sections have appeared,
Select Switch Number and Trigger Switch Type.
Select one of the six radio buttons under "Select
Switch Number" to assign an input trigger to this
show. Select the radio button under "Trigger Switch
Type" for the switch type that you will be using to
start this show, either a normally open switch or a
normally closed switch. See the Interactive Inputs
and Interactive Trigger Connections sections for
more information on input triggers.
Triggered shows do not obey schedules. They run
when triggered.
Use the Select How Show Plays section to choose
how the show will play when triggered. If you
select...
• Loop though Showlist continuously –
Sequences in the show play in order and
repeat continuously.
Page 27
DC-MP3 DC-MP3
• Play through Showlist one time only –
Sequences in the show play in order one
time.
• Play show once per hour or ½ hour – This is
ignored for triggered shows.

Adding Sequences to the Show

Use the MP3 Player Showlist section to add
sequences to the show.
• Add Sequence button to select a sequence
to add to this Showlist
• Remove Sequence button to delete the
selected sequence from the Showlist
• Move Up button to move a selected
sequence up in the Showlist
• Move Down button to move the select
sequence down in the Showlist
For example, click the Add Sequence button and
you will see a Open file box listing the sequences
loaded on you PC. The sequence file Open window
follows:
Page 28