Light O Rama DC-MP3 User Manual page 17

Start the LightORama Control Panel if it is not
running by clicking start ► All Programs ►
LightORama ► Light-O-Rama Control Panel. The
Light-O-Rama light bulb icon will appear in the
system tray on the lower right of your screen.
Start the Hardware Utility by right-clicking the Light-
O-Rama Control Panel light bulb and then selecting
Hardware Utility from the menu. You will see the
following window:
Click the LOR MP3 tab, you will see this window:
Page 33
DC-MP3 DC-MP3
Make sure the Old Firmware box in the Scheduling
/ Show Options section is NOT checked.
You can build and schedule up to nine (9) shows,
their names are Show01, Show02, ... Show09. Use
this window to set up and schedule a single show.
When you click the Create Show button later, a new
window will pop up allowing you to name this show
and set some other options.
Only one show can play at a time. If you schedule
two or more shows during the same time period,
precedence is given to the lowest numbered show.
The Select When Show Plays section provides two
options:
1. Play anytime powered – you will have to
provide a timer or switch to control power to
the DC-MP3
2. Play During Scheduled Time – you select the
days of the week and time period during
those days that the show plays
Page 34