Page 1
Introduction The Empath 10" format mixer offers big-board features and studio quality sound. The mixer is feature packed, yet easy and intuitive to use. How did we pull it off? We asked the master — Grandmaster Flash is responsible for many of the important features and control locations, even the name.
Page 2
Three, fully equipped stereo input channels 1/2/3 PHONO • One Phono and one Line Input for each channel. ° Inputs are unbalanced RCA. LINE GAIN ° Be sure to connect each turntable ground to the Phono GND terminal. ° PHONO/LINE source switch selects the Input for each channel. •...
° Do not spray lubricant on the slide mechanism — Apply a drop of silicone lubricant directly on rod. ° When in doubt, give Rane a call: 425-355-6000. ° Failure to follow these simple instructions may affect the performance of the pot and will void the warranty.
Mic Input • Balanced ¼" TRS input (Tip (+), Ring (–), Sleeve (ground) • Accepts unbalanced ¼" TS (Tip-Sleeve) plugs. INPUT • Mic Engage switch turns the Mic on and off without changing the Mic level. 1-2-3 ° Green indicator lights when engaged. •...
° Off to +6 dB ° Use in combination with the DRY/WET pan controls to determine how much effect is in the Master mix. ° Increases the signal level of low voltage effects processors to the higher levels possible with the Empath. Manual-5...
Page 6
CD1 TRIGGER CD2 TRIGGER CD Triggers • The Empath mixer provides two CD triggers: ° CD1 TRIGGER switch determines trigger source → Input Fader 1 is the source → No trigger → A-side Crossfader is the source ° CD2 TRIGGER switch determines trigger source →...
Page 7
Please note that the fader must be removed from the panel before servicing. Spare Parts The following replacement parts are available for the PGFX3000 Series crossfader. Description Penny & Giles Part No. Rane Part Number Complete fader D460621 12206 (shown right) Complete slider assembly...
Need help?
Do you have a question about the EMPATH and is the answer not in the manual?
Questions and answers