Sony SRW-1 Operation Manual page 69

Code
a)
SRW-1 warning SRPC-1 warning
0036 0136
0037 0137
— 0138
— 013A
— 013C
— 013E
— 013F
004F 014F
0050 —
0051 —
— 0156
0060 —
0067 —
a) When an SRW-1 warning occurs, the warning code is displayed following
the indication "VTR:".
b) When an SRPC-1 warning occurs, the warning code is displayed following
the indication "VA:".
Message
b)
SDI FMT MISMATCH
SDI I/P MISMATCH
NO EXT SDI INPUT
INVALID SDI DATA
SDI A-B PHASE NG
SDI FMT MISMATCH
SDI I/P MISMATCH
AUDIO DSP UNLOCK
NO PB RF
BAD CH CONDITION
OPM IN LEVEL LOW
LOST LOCK
CASSETTE REC INHI
Description
Format of signals input to HD SDI IN A and B
connectors does not match system setting.
I/P of signals input to HD SDI IN A and B connectors
does not match system setting.
There is no HD SDI input signal, or the correct signal
is not being input.
EXT SDI input signal data is invalid.
During SDI DUAL input, the phase difference
between SDI input A and B is outside the allowable
range.
The format of the SDI input signal does not match
the system setting.
The Interlaced/progressive format of the SDI input
signal does not match the settings of this unit.
Audio signal processing circuits are not active.
Audio signal processing circuitry is not operating.
Playback head is not reading digital data from tape.
Playback signal quality is bad.
When the optional HKSR-101 is installed, the optical
signal level of the signal input to the CAMERA
connector is low.
Capstan servo lock lost during playback or recording.
(This message remains even after servo lock is
restored. You can erase it by pressing the PLAY
button.)
The cassette is record-protected.
Error Messages and Warning Messages
69