Sony SRW-1 Operation Manual page 30

Connections to input playback signals to an external HD VTR
In the SYSTEM Setup menu, set REFERENCE >MODE
to "External," set REFERENCE >EXTERNAL to "HD"
(see page 48), and then connect as shown below.
Reference signals
In the SYSTEM Setup menu, set
REFERENCE >MODE to
"External," and set REFERENCE
>EXTERNAL to "HD."
Connections to output playback signals from this system (synchronized with both
23.98PsF and 59.94i)
When the frame frequency is 23.98PsF, you can
synchronize pulldown output signals and downconvert
output signals to a 59.94i reference signal input to the REF
IN SD connector.
In the SYSTEM Setup menu, set REFERENCE >MODE
to "External," set REFERENCE >EXTERNAL to
"HD&SD"(see page 48), and then connect as shown
below.
Reference signal input
(HD 23.98PsF)
Synchronized
Reference signal input
(SD 59.94i)
In the SYSTEM Setup menu, set
REFERENCE >MODE to
"External", and set REFERENCE
>EXTERNAL to "HD&SD".
30
3-3 About Reference Sync Signals
HD SDI OUT A/B
(A only or A/B)
REF IN HD
SRW-1 + SRPC-1
REF IN HD MONITOR OUT HD SDI
REF IN SD
MONITOR OUT SD SDI
SRW-1 + SRPC-1
SD monitor
Note
When you make the menu settings described at left, always
input an HD tri-level sync signal to the REF IN HD
connector.
Notes
• These settings are valid only when the frame frequency
of this system is 23.98PsF.
• When you make the settings described at left, always
input the appropriate reference signals to the REF IN HD
and REF IN SD connectors. These reference signals
must be synchronized.
A warning message appears if they are not synchronized.
(HD 23.98PsF)
HD SDI OUT A/B
(A only, or A/B)
(HD 23.98PsF or 59.94i) (according to
the setting of PD(MON) in the Video
Setup menu)
(SD 59.94i)
HD SDI INPUT A/B
(A only or A/B)
SRW-5000 HD Digital
Videocassette Recorder
HD SDI INPUT A/B
(A only, or A/B)
SRW-5000 HD Digital Videocassette
Recorder
HD monitor