Sony SRW-1 Operation Manual page 42

Item
TCG SET(MAIN)
Timecode generator
settings for the main
timecode
Note
These settings are
valid only when the
TCG MODE item is set
to PRST.
OTHERS(MAIN)
Other settings related
to main timecode
PD TC
Settings related to
pulldown timecode
42
4-2 TC Setup Menu
Settings
DF/NDF Selects the frame count mode.
(Valid only when the DF [Drop Frame]: Drop-frame mode
frame frequency of NDF [Non Drop Frame]: Non-drop frame mode
this system is 29.97
Hz)
UBG SOURCE Selects the source timecode of user bits.
TCG [TCG Source]: The same source as the source of the internal timecode
generator
INT [Internal]: Timecode generated by the timecode generator. Arbitrary user
bits settings (see page 57) are possible, regardless of the "TCG" setting.
12H/24H Selects the CTL display mode.
12H [+/–12H]: 12-hour display mode
24H [24H]: 24-hour display mode
Note
When +/–12H display is selected, the tens digit of the hours value is dropped for
values less than 10.
TC OUT Selects the timecode output from the TC OUT connector.
AUTO [Auto]: During playback, timecode read by the internal timecode reader.
During recording (including E-E mode), timecode generated by the timecode
generator is output, delayed by 1 frame. (This maintains synchronization
with the output video).
TCG [TCG]: Timecode generated by the timecode generator is output, delayed
by 1 frame. (This maintains synchronization with the output video).
THRU [Through]: Through output of timecode input to the TC IN connector
TCG (No Delay): Timecode generated by the timecode generator is output, with
no delay. (The timecode is out of synchronization with the output video,
being 1 frame in advance of the video.) Select this setting when you want to
synchronize other devices, using the timecode generator of this unit as the
master.
Selects whether or not to record the real time in user bits (see page 57).
RT REC
OFF [Off]: Do not record.
VITC [VITC UB]: Record in VITC.
V+L [VITC UB+LTC UB]: Record in VITC and LTC.
LTC [LTC UB]: Record in LTC.
RT SET Sets the real time.
LTC Delay Sets the phase difference between the timecode generator and the LTC input
from the TC IN connector.
0 [NO Delay]: Same timing
+1F [+1F Delay]: The generator is delayed by 1 frame
VITC Delay Sets the phase difference between the timecode generator and the LTC/VITC
timecode of the video signal input from the HD SDI IN A/B connectors.
0 [NO Delay]: Same timing
+1F [+1F Delay]: The generator is delayed by 1 frame
TC PRESET Presets pulldown timecode.
DF/NDF Selects the frame count mode for pulldown timecode to preset.
DF [Drop Frm]: Drop-frame mode
NDF [Non Drop Frm]: Non-drop frame mode