HP ProLiant DL360 Quickspecs page 38

QuickSpecs
Memory
Configuration Configuration Configuration Configuration
1*
2
3
*NOTE: *NOTE: Configuration 1 is only supported if using bank A, populated with dual-rank FBDIMMs. *NOTE: *NOTE:
Mirrored memory FBDIMMs configuration requirements (in addition to general configuration requirements):
Banks A and B must be fully populated.
Bank A and bank B must contain FBDIMMs with identical part numbers. If installed, bank C and bank D must also contain
FBDIMMs with identical part numbers.
When using mirrored memory mode, FBDIMMs must be populated as specified in the following table:
Configuration Configuration
Configuration Configuration
1
2
Branch 0 Branch 0 Branch 0 Branch 0
Bank A Bank A Bank A Bank A
1A and 3A 1A and 3A 1A and 3A 1A and 3A
X
X
X
Bank A Bank A
Bank A Bank A
1A and 3A 1A and 3A 1A and 3A 1A and 3A
X
X
DA - 12476 North America — Version 30 — November 14, 2007
HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5)
Branch 0 Branch 0 Branch 0 Branch 0
Bank C Bank C Bank C Bank C
2C and 4C 2C and 4C 2C and 4C 2C and 4C 5B and 7B 5B and 7B 5B and 7B 5B and 7B
-
X
X
Bank B Bank B
Bank B Bank B
5B and 7B 5B and 7B 5B and 7B 5B and 7B 2C and 4C 2C and 4C 2C and 4C 2C and 4C
X
X
Branch 1 Branch 1 Branch 1 Branch 1 Branch 1 Branch 1 Branch 1 Branch 1
Bank B Bank B Bank B Bank B
6D and 8D 6D and 8D 6D and 8D 6D and 8D
-
-
X
Bank C Bank C
Bank C Bank C
6D and 8D 6D and 8D 6D and 8D 6D and 8D
-
X
Bank D Bank D Bank D Bank D
-
-
X
Bank D Bank D
Bank D Bank D
-
X
Page 38