HP ProLiant DL360 Quickspecs page 10

QuickSpecs
Standard Features
Required Cabling Required Cabling Required Cabling Required Cabling
OS Support OS Support OS Support OS Support
Rack Airflow Rack Airflow Rack Airflow Rack Airflow
Requirements Requirements Requirements Requirements
Rack Kit Rack Kit Rack Kit Rack Kit
For required cabling information, refer to the Web site at
http://h18000.www1.hp.com/products/servers/proliantdl360/.
Microsoft Windows 2000 Server
Microsoft Windows Server 2003
Novell NetWare
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Solaris 10 32/64-bit
VMware Virtualization Software
NOTE: NOTE: NOTE: SAS and SATA models may have different OS support. Please see OS Support Matrix. NOTE:
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our OS NOTE: NOTE: NOTE:
Support Matrix page at: http://www.hp.com/go/supportos.
NOTE: NOTE: NOTE: For more complete and up-to-date information on how to buy server operating systems from HP NOTE:
please visit the OS product site at:
NOTE: For a listing of the latest drivers available for the HP ProLiant DL360, please see: NOTE: NOTE: NOTE:
http://h18023.www1.hp.com/support/files/server/us/index.html.
NOTE: For more Linux OS support & certification information, please visit our the ProLiant & NOTE: NOTE: NOTE:
BladeSystem Server Linux matrix:
NOTE: NOTE: NOTE: NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the VMware
Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.
Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: CAUTION: CAUTION: If a third-party rack is used, observe the following additional requirements to ensure CAUTION:
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be
a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This CAUTION: CAUTION: CAUTION:
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: NOTE: NOTE: NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server, or to the server documentation located in the Support section at the following
URL: http://h18000.www1.hp.com/products/servers/proliantdl360/index.html.
The HP ProLiant DL360 quick deploy rail system provides tool-free support for racks with square or
round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series) with an adjustment
range to fit a rack depth of 21.25" to 37.75".
DA - 12476 North America — Version 30 — November 14, 2007
HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5) HP ProLiant DL360 Generation 5 (G5)
http://h18004.www1.hp.com/products/servers/software/OEM.html
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
Page 10