Advertisement
Features and Benefits
Compliant with PCI Local Bus Specification, Revision 2.3
Supports 2 x UART serial ports
Easy Plug and Play
Automatically selects IRQ & I/O address
Built-in 16C450/550 compatible UART
On chip 256 byte FIFOs in transmit and receive path of each
serial port
Serial data transfer rate up to 115200bps
Bus PCI 32-bit
Connectors 2 x DB9 male serial connectors
System Requirements
®
Windows
Available PCI slot
Package Contents
1 x 2-Port Serial PCI Card
1 x Driver CD
1 x User's Manual
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer's cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card's bus connector
with the selected PCI slot on the motherboard. Push the
board down firmly.
5. Replace the slot bracket's holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
2000, XP/2003, Vista，Windows 7
Advertisement
