Table of Contents
Advertisement
Use Static IP Address
Unless your service provider specially requires this setup, do not select it.
If selected, enter your static IP address.
Enable IGMP Multicast checkbox: Tick the checkbox to enable IGMP multicast
(proxy). IGMP (Internet Group Membership Protocol) is a protocol used by IP hosts
to report their multicast group memberships to any immediately neighboring
multicast routers.
MTU
This option allows us to change the MTU size for WAN interface, PPPoE and PPPoA.
The default value is 1492 for PPPoE and 1500 for PPPoA.
2. Click Next to display the following screen.
Enable IGMP Multicast checkbox: Tick the checkbox to enable IGMP multicast
(proxy). IGMP (Internet Group Membership Protocol) is a protocol used by IP hosts
to report their multicast group memberships to any immediately neighboring
multicast routers.
Enable WAN Service checkbox: Tick this item to enable the ATM service. Untick
it to stop the ATM service.
Service Name: This is user-defined.
31
Advertisement
Table of Contents
