Table of Contents
Advertisement
7.1.4
Advanced
The Advanced page allows you to configure advanced features of the wireless LAN
interface. You can select a particular channel on which to operate, force the
transmission rate to a particular speed, set the fragmentation threshold, set the RTS
threshold, set the wakeup interval for clients in power-save mode, set the beacon
interval for the access point, set XPress mode and set whether short or long
preambles are used.
Click Apply to configure the advanced wireless options.
Option
Description
AP Isolation
Select On or Off. By enabling this feature, wireless
clients associated with the Access Point will be able to connect to
each other.
Band
The new amendment allows IEEE 802.11g units to fall back to
speeds of 11 Mbps, so IEEE 802.11b and IEEE 802.11g devices can
coexist in the same network. The two standards apply to the 2.4
GHz frequency band. IEEE 802.11g creates data-rate parity at 2.4
GHz with the IEEE 802.11a standard, which has a 54 Mbps rate at
5 GHz. (IEEE 802.11a has other differences compared to IEEE
802.11b or g, such as offering more channels.)
76
Advertisement
Table of Contents
