Table of Contents
Advertisement
Insert the Digital Pocket Memo into the
2
docking slot of the docking station and press
it down firmly until it locks. The green LED
illuminates, indicating that the batteries
of the Digital Pocket Memo are being
recharged in fast recharge mode.
When the green LED blinks, recharging is
3
complete and the Digital Pocket Memo can
be removed from the docking slot.
D Note
When the Digital Pocket Memo is connected
to the docking station, it is powered by the
docking station and not by the batteries. If
the Digital Pocket Memo is operated with
rechargeable batteries, the batteries are
automatically recharged while the Digital Pocket
Memo is connected to the docking station.
2.2.3
Recharge the batteries using the
optional Philips power supply
Connect the Philips power supply to the
1
main power supply.
Connect the Digital Pocket Memo to the
2
Philips power supply.
D Note
It is okay to continue using the Digital Pocket
Memo during recharge. The batteries will be
recharged while you work, and will continue
recharging even when the Digital Pocket Memo
is turned off.
8
2.3
Insert and eject the memory card
The Digital Pocket Memo operates with a SD
(SecureDigital) memory card and supports
SDHC cards with storage capacities of up to 32
GB.
Your Digital Pocket Memo is packaged with a
memory card already inserted and formatted.
To eject the memory card:
Locate the memory card slot on the top
1
back side of the Digital Pocket Memo.
Press the memory card into the Digital
2
Pocket Memo until it clicks.
Release the memory card. It will slightly
3
emerge from the memory card slot. Simply
slide it out.
1
To insert a memory card:
Locate the memory card slot on the top
1
back side of the Digital Pocket Memo.
Slide the memory card into the slot. A small
2
illustration under the memory card slot
indicates the correct orientation.
Push the memory card in until it clicks.
3
1
2
2
User manual
Hide quick links:
Advertisement
Table of Contents
