Table of Contents
Advertisement
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
SHARP SUPER PICTURE
normally set to ON. To turn
VCR front panel.
•
For double speed playback (without sound), press
•
To revert to normal playback, press
•
To stop the video tape, press
•
To eject the tape press
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
•
Press
CHANNEL
Tracking)
•
Press
CHANNEL
PAUSING AND SLOW MOTION
1.
PLAY/X2
Press
2.
To pause the video tape, press
•
To minimise jitter whilst in pause mode press
•
Press
PLAY/X2
3.
To playback in slow motion (without sound) press
motion speed can be adjusted using the
Picture disturbance can be improved by using the
motion playback.
PLAY/X2
•
Press
NOTES:
•
When using SLOW MOTION function some mechanical noise may be heard.
•
There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
•
PAUSE mode will disengage after about 5 minutes.
should enhance the picture quality during playback. It is
SHARP SUPER PICTURE
PLAY/X2
STOP
(
EJECT
on the VCR.
or
to position picture interference off the TV screen. (Manual
and
buttons together to start Auto Tracking.
(
) to start the video tape playing.
PAUSE/STILL (
(
) to resume playback.
(
)to resume playback.
on or off press
PLAY/X2
(
) again.
).
)
.
CHANNEL
SLOW
or
buttons next to the slow button.
CHANNEL
9
SUPER P.
(
) again.
flashes on the on-screen
or
.
on the remote control. Slow
or
during slow
on the
Advertisement
Table of Contents
