How To Playback A Video Tape; Sharp Super Picture; Pausing And Slow Motion - Sharp VC-GH611GM Operation Manual

TINS-A083UMZZEnglish.book Page 8 Monday, November 11, 2002 9:39 AM
BASIC OPERATION

HOW TO PLAYBACK A VIDEO TAPE

•
•
•
•

SHARP SUPER PICTURE

SHARP SUPER PICTURE
normally set to ON. To turn
front panel.
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
•
•

PAUSING AND SLOW MOTION

1.
2.
•
•
3.
•
NOTES:
•
•
•
Downloaded from: http://www.usersmanualguide.com/
For double speed playback (without sound), press
To revert to normal playback, press
To stop the video tape, press STOP
To eject the tape press EJECT
should enhance the picture quality during playback. It is
SHARP SUPER PICTURE
CHANNEL K L
Press or to position picture interference off the TV screen. (Manual
Tracking)
CHANNEL K L
Press and
w
Press PLAY/X2 ( ) to start the video tape playing.
To pause the video tape, press
To minimise jitter whilst in pause mode press
w
Press PLAY/X2 ( ) to resume playback.
To playback in slow motion (without sound) press
motion speed can be adjusted using the
Picture disturbance can be improved by using the
motion playback.
w
Press PLAY/X2 ( )to resume playback.
When using SLOW MOTION function some mechanical noise may be heard.
There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
PAUSE mode will disengage after about 5 minutes.
PLAY/X2
w
PLAY/X2 ( ) again.
r
( ).
on the VCR.
on or off press
buttons together to start Auto Tracking.
PAUSE/STILL (II)
.
CHANNEL K
Iw SLOW on the remote control. Slow
— ±
or buttons next to the
CHANNEL K
GB-8
w
( ) again.
SUPER P. on the VCR
flashes on the on-screen
L
or .
Iw SLOW button.
L
or during slow