Pausing And Slow Motion - Sharp VC-M311AHM Operation Manual

BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
SHARP SUPER PICTURE should enhance the picture quality during playback. It is
normally set to ON. To turn SHARP SUPER PICTURE on or off press SUPER P. (SET) on
the VCR front panel.
For double speed playback (without sound), press PLAY/X2 (
To revert to normal playback, press PLAY/X2 (
To stop the video tape, press STOP (
To eject the tape press EJECT
PICTURE DISTURBANCE DURING PLAYBACK
This VCR has an automatic tracking system which reduces picture disturbance when you start
to playback a video tape. When auto-tracking is in operation
display. If the picture still has disturbance you may need to manually track the video tape:
During PLAYBACK of a video tape.
Press CHANNEL
Tracking)
Press CHANNEL

PAUSING AND SLOW MOTION

1. Press PLAY/X2 (
2. To pause the video tape, press PAUSE/STILL (
To minimise jitter whilst in pause mode press CHANNEL
Press PLAY/X2 (
3. To playback in slow motion (without sound) press
motion speed can be adjusted using the
disturbance can be improved by using the CHANNEL
playback.
Press PLAY/X2 (
NOTES:
There will be picture interference and possibly a change to black and white picture
using Pause and Slow functions.
PAUSE mode will disengage after about 5 minutes.
).
on the VCR.
or to position picture interference off the TV screen. (Manual
and buttons together to start Auto Tracking.
) to start the video tape playing.
) to resume playback.
) to resume playback.
) again.
flashes on the on-screen
).
or
SLOW on the remote control. Slow
+
or buttons next to the slow button. Picture
or
8
) again.
.
during slow motion