Advertisement
INSTALLATION INSTRUCTIONS WGI-F13
TOOLS REQUIRED:
Power drill
Magic marker or pencil
Phillips screwdriver
1/8" drill bit
HARDWARE FOR PASSENGER DOORS (WGI-F13-1 & WGI-F13-6):
18
#10 X 1/2" Sheet metal screws
INSTALLATION: (PASSENGER DOORS)
1.
Hold window guard up to the window frame, and while pushing down against the door window
frame, mark mounting hole locations. Remove guard and drill out mounting holes with 1/8" drill
bit. Attach guards with #10 X 1/2" sheet metal screws.
POSITION #1
DRIVERS
SIDE
PASSENGER
DOOR
F13-1
INTERIOR WINDOW GUARDS
FOR 2002-2008 FORD EXPLORER
FORD EXPLORER
WINDOW GUARD POSITIONS
MODEL WGI-F13
3/16" drill bit
Safety Goggles
Snips or cutter for plastic trim
Ratchet wrench with 7/16" socket
GSM34150
POSITION #6
PASSENGER
SIDE
PASSENGER
DOOR
F13-6
WGI-F13_INST_9-07
Advertisement
Table of Contents
Need help?
Do you have a question about the WGI-F13 and is the answer not in the manual?
Questions and answers