Menu #5 BEEP
Function:
Enables/disables the beeper.
See
Activate the Key/Button Beeper
Values: BEP.ON
,
Default: BEP.ON
Menu b 6 CLK.SFT
Function:
Shifts the
Values: SFT. ON
Default: SFT.OFF
(1) This function is only used to move a spurious response birdie, should it
fall on a desired frequency.
(2)The value for this Menu Item is to be applied separately to each Hyper
Memory Channel.
Menu #7 CWID
Function:
Enables/disables the
Values: TX ON
,
TX OFF
Default: TX OFF
Menu #8 CWID W
Function:
Stores your callsign into the
See
Set Up the CW Identifier
Values:
Default:
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
BEP.OFF
clock frequency.
CPU
,
SFT.OFF
CW Identifier
CW Identifier
on page 51 for details.
on page 19 for details.
during
operation.
ARTS
. Up to six characters may be stored.
MENU ITEMS
Page 65 of 77