Menu Quick Reference Table - Yaesu FT-8900R Operating Manual

Menu Quick Reference Table

Item # Menu Function
1 APO Selects the Automatic Power Off time.
h 2 ARS Activates/deactivates the Automatic Repeater Shift
feature.
h 3 ARTS Selects the ARTS beep mode.
h 4 BAND Enables/disables the VFO Band edge for the current
band.
5 BEEP Enables/disables the beeper.
b 6 CLK.SFT Shifts the CPU clock frequency.
7 CWID Enables/disables the CW identifier during ARTS
operation.
8 CWID W Stores your callsign into the CW identifier.
9 DIMMER Sets the Display brightness level.
b 10 DCS.COD Sets the DCS code.
11 DCS.N/R Selects Normal or Inverted DCS coding.
h 12 DSP.SUB Selects the Sub Band display format.
13 DTMF D Sets of the DTMF Autodialer Delay Time.
14 DTMF S Sets of the DTMF Autodialer Sending Speed.
15 DTMF W Loads the DTMF Autodialer Memories.
16 HYPER Enables/disables the Automatic Writing feature for Hyper
Memory.
17 INET Selects the Internet Connection mode.
Selects the Access Number (DTMF digit) for WIRES™
18 INET C
operation.
19 INET M Selects the Access Number (DTMF code) for non-
WIRES™ Internet Link System access.
20 KEY.MOD Selects the key functions for the right band function
switches.
21 LOCK Enables/disables the Key/Button Lock feature.
22 LOCKT Enables/disables the PTT Lock feature.
23 MIC Selects the microphone type to be used.
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
MENU ITEMS
Available Values Default
OFF, 0.5H – 12.0H OFF
ON, OFF varies
IN RNG, ALWAYS
BND ON
BND ON, BNDOFF
BEP.ON
BEP.ON, BEP.OFF
SFT.OFF
SFT.ON, SFT.OFF
TX OFF
TX ON, TX OFF
DIM 1
DIM 1, DIM 2, DIM
3, OFF
023
TRX N
TRX N, RX R, TX R,
TRX R
FREQ
FREQ, CWID, DC-
IN, OFF
450MS
50MS, 250MS,
450MS, 750MS,
1000MS
50MS
50MS, 75MS,
100MS
MANUAL
MANUAL, AUTO
INT.COD
INT.COD, INT.MEM
CODE 0 – 9, CODE 1
CODE A – F
d-1 – d-16 d-1
KEY1
KEY1, KEY2
OFF
ON, OFF
OFF
OFF, BAND R,
BAND L, BOTH
MH-48
MH-48, MH-42
Page 61 of 77