Delete A Memory; Set A Home Channel For An Operating Band - Yaesu FT-8900R Operating Manual

Dual band fm transceiver the w5jck expanded version
Hide thumbs Also See for FT-8900R:
Table of Contents

Advertisement

Delete a Memory

With 808 memories available (except memory channel #1), there are frequently situations
where you may desire to delete certain memorized frequencies. The procedure for deleting a
channel is quite simple:
1. If operating in the
mode.
2. Press and hold in the
select the memory channel to be deleted. (Note that memory channel #1 may not be
deleted.)
3. Press the
Main
#1. If you rotate the
observe that it is now invisible.
Once deleted, the channel data cannot be recovered.

Set a HOME Channel for an Operating Band

A special one-touch
allow quick recall of a favorite operating frequency on each band. To store a
1. Select the desired frequency while operating in the
sure to set up any desired
The power level may also be set at this time.
2. Press and hold in the
(blinking) on the display.
3. While the memory channel number is blinking, press the
frequency and other data will now be stored in the special
You may repeat this process on the other operating bands.
To recall the
HOME
mode.
Memory
Yaesu FT-8900R Operating Manual Expanded Edition (courtesy of W5JCK)
mode, press the
VFO
SET key
band
key momentarily. The display will revert to memory channel
knob to the location you just
DIAL
0.
channel is available (one for each of the six operating bands), to
HOME
CTCSS
SET key
channel, just press the
key momentarily to enter the
for ½ second, then rotate the
VFO
or
tones, as well as any desired repeater offset.
DCS
for ½ second. A memory number will appear
key while operating either in the
REGULAR MEMORY
Memory
knob to
DIAL
, you will
Masked
channel:
HOME
mode on the
band. Be
Main
key. The
channel register.
HOME
VFO
Page 36 of 77
0.
or

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

W5jck

Table of Contents