Table of Contents
Advertisement
Before using this unit. the following steps should be followed. according to the situation in which the unit will be used.
I
"Connection and Settings"
(l3Fpage 5)
"Connecting the External Controller"
(l3Fpage 12)
• Normal Connections
(l3Fpage 9)
• Bi·Amp Connections
(l3Fpage 10)
• Bridge Connections
(l3Fpage 11)
Set the control method
Set the operation mode and input mode,
then connect the speakers
All setup options are carried out
using
the
AVP-A 1HDCI
setup
menu. ("Connect to AVP-A1HDCI"
(l3Fpage 7))
"OPTION/1/2 mode selection"
(l3Fpage 6)
Preparations
,:;;
!*
Note
-
*
IgCJgl
*
~
I - - -
. .
.
".
.
~
Cautions on Installation
Wall
Note:
For proper heat dispersal, do not install this unit in a confined
space, such as a bookcase or similar enclosure.
-N,n-
• Since this unit is very heavy, when installing it on a rack etc, the
maximum load capacity of the rack should always be checked first.
Please refer to the user manual for the rack for the maximum load
capacity.
• Always have at least two people work together to move the POA-
A1HDCI.
Operations ("Operations" (l3Fpage 13))
2
Advertisement
Table of Contents
