Connecting The External Controller; Connecting The Power Cord; Once Connections Are Completed - Denon POA-A1HDCI Owner's Manual

Connecting the External Controller
When using the following functions, set the CONTROL switch to -EXTERNAL
M.
Connecting the Power Cord
Wait until all connections have been completed before connecting the power cord.
To wall-mounted
power outlet
lAC 120 V. 60 Hz)
*
In order to fully demonstrate the ability of POA-
A
1
HDCI. connect the unit to a larger current
capacity outlet (at least 15 A is recommended).
Also. be sure that the total power consumption
of all devices connected to the outlet does not
exceed the outlet capacity.
.~(.ii.
-Insert the AC plugs securely. Incomplete connections could cause noise.
- The power plug must be connected to a wall-mounted power outlet.
- Do not connect the unit to an integrated AC outlet on another product
or
to extension cord.
Once Connections are Completed
I
Turning the Power On
lGf"page 13)
12
<: