Timer Setting - Sanyo ST-21XS2S Owner's Manual

ON TIMER SETTING
When the ON TIMER is set. TV will automatically be switched on to the selected
Channel number when the specified time has elapsed.
1
Press the SLEEP key twice.
2
Press the VOLUME + or - key to
select the time period. The set time will
be increased or decreased by 10
minutes each time when the VOLUME
+ or - key is pressed ; the maximum
time which can be set is 24 hours.
3
Use Number key function to insert
Channel number for when the TV set
is switched on by ON TIMER. (see
page 9.)
Note:
If no operation is performed after the
TV has been switched on by the ON
TIMER, such as if you are not at
home, the TV will be automatically
switched off after approximately
2 hours
If the TV is already switched on when
the time set for the ON TIMER has
been reached, only the Channel
number will be changed to the set
Channel number.
Cancelling ON TIMER. To cancel the
ON TIMER, press the VOLUME + or -
key to set it to O O N 0:00
TIMER screen is shown. Switching off
the TV by pressing the Mains Power
Switch will also cancel the ON TIMER
settings.
20
while the ON
Channel number for when TV is
switched on by ON TIMER.
O N : 0 : 0 0 1 1
O N : 0 : 0 0 1 1
(ON TIMER Setting Mode)