Channel Setup Menu; Setting The Antenna Mode; Resetting Channel Search - Sanyo ST-21XS2S Owner's Manual

CHANNEL SETUP MENU

Your TV can receive 181 channels: Off-Air VHF 2-13 and UHF 14-69 or Cable 1-125.
The available channels are stored in the channel scanning memory in this TV.
Make sure that your antenna is connected to the TV before setting the Antenna Mode
or resetting the Channel Search.

SETTING THE ANTENNA MODE

1 Press MENU. The Main Menu will
appear. (See page 13.)
2 Press the CHANNEL
(down) key to select PRESET;
then press the VOLUME + or – key.
3 Press the CHANNEL
(down) key to select ANTENNA.
4 Use the VOLUME + or – key to select
VHF/UHF or CABLE.
Select either VHF/UHF
2-13 and UHF channels 14-69), or
CABLE (channels 1-125). The Cable
indicator C appears with the channel
number. (For example: C 34.)

RESETTING CHANNEL SEARCH

You can automatically program the tuning system of this TV to scan only the channels
available in your area. Then when you press one of the CHANNEL SCANNING ( /
keys, the TV will select only those channels.
1 Press MENU. The Main Menu will
appear. (See page 13.)
Press the CHANNEL
2
(down) key to select CHANNEL;
then press the VOLUME + or – key.
3 Press the CHANNEL
(down) key to select SEARCH.
4 Use the VOLUME + or – key to select
START.
The TV will begin searching through the
channels. After the search is completed,
the lowest available channel will be
selected.
Note: If additional channels become available (you move to another city or cable is
installed), perform another channel search.
14
(up) or
(up) or
(VHF channels
(up) or
(up) or
PICTURE
AUDIO
PRESET
Select CHANNEL and press VOLUME
+ or -
ANTENNA
SEARCH
CHANNEL
SKIP
MEMORY
SELECT ADJUST
Select Antenna mode
ANTENNA
SEARCH
CHANNEL
SKIP
MEMORY
Starting automatic channel search
VHF/UHF (CABLE)
START
(C34)
02
OFF
--
EXIT
VHF/UHF
START
02
OFF
--
)