Setting The Sleep Timer Feature - Sanyo DS25230 Owner's Manual

SETTING THE SLEEP TIMER FEATURE
Use the Sleep key and the Channel Selection "0" key, on the Remote Control,
to set the Sleep Timer feature to switch off the TV automatically. This feature
can switch off the TV after 30 minutes, 1 hour, 1 hour and 30 minutes, or
2 hours.
Q
Press and release the Sleep key.
The Sleep Timer Display will
appear.
Press and release the Channel
Selection "0" key repeatedly until
the desired delay setting appears.
The on-screen display will disap-
pear after five seconds to activate
the Sleep Timer feature. (Note the
on-screen "SLEEP" Indicator.)
SLEEP: 0 • 00
USE 0 KEY
SLEEP: 0 • 30
SLEEP: 1 "00
SLEEP: 1 "30
SLEEP: 2"00
USE 0 KEY
i
SLEEP
INDICATOR
_ SLEEP
C 34
12 " 47
NOTES:
Once the Sleep Timer is set, you can check the time remaining by pressing the
Sleep key.
To cancel the Sleep Timer: Press the Sleep key once; then press and release
the "0" key until "0:00" appears in the display.
If t_he TV is switched off or a power failure occurs, the Sleep Timer feature will
be cancelled.
17