Plug In The Power Cord; Turn On The Tv; Plug & Play - Sanyo ST-21XS2S Owner's Manual

Remote control color tv/monitor
Table of Contents

Advertisement

PLUG IN THE POWER CORD

Plug the power cord into a convenient wall outlet that has standard house power of
230 volts ac, 50/60 Hz.
CAUTION: To prevent electric shock,
insert the AC PLUG fully into the outlet.
Note: As a safety precaution, unplug or turn
off the TV with the MAIN POWER
switch
on the TV front panel
plan to be away for an extended
period of time.

TURN ON THE TV

POWER
Press the
Note: The TV will switch off automatically after 10 minutes if a signal is not being
received. (This feature is not active while the
PLUG & PLAY (
This TV set provides a self-automatic tuning and sorting system function called "Plug &
Play". It automatically begins searching and storing of all available channels when
switching-on the TV set for the first time.
Let's start !
1
Connect power cord of the TV set to a wall outlet, and turn on the TV set by
pressing the Mains ON/OFF button. Self-automatic tuning system will be started.
After completing this procedure, the lowest available programme position is selected and
the ending messages on the screen.
Note: The Plug & Play can be cancelled at any time by pressing the MENU button.
2
Press any of the control buttons to make the ending message disappear.
(Or will automatically return to normal TV display after 10 seconds.)
This procedure only appears at the first switch-on time.
If no TV stations are found, the display shown below will appear. Please check if
the antenna is connected properly.
12
when you
key.
Automatic setting up channels)
NO STATION.
PLEASE CONNECT
ANTENNA PLUG.
A
A
V
mode is selected.)
If it isn't connected properly, connect
antenna and Automatic Tuning will be reset.
AC PLUG

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents