Installing For Windows 98 First Edition; Installing The Modem - Sagem F@st 1000 N56815740110 User Manual

Equipped of an usb interface

Table of Contents

! 3 - Installing the SAGEM F@st

3.5

Installing for Windows 98 First Edition

For Windows 98 First Edition, installation of the SAGEM F@st

to the following process:

! Installing the modem drivers,

! Configuring a new dial-up connection.

3.5.1

! Switch off the modem if it is powered by unplugging the power supply cable either on the modem

side (connector marked PWR), or on the mains side.

! Switch on the PC and wait for the complete start-up of Windows 98FE.

! Insert the installation CD-ROM; the welcome page appears after a few seconds.

If this screen does not appear automatically proceed as follows:

From the Start menu select Run then enter <Drive letter for the CD-ROM>:\English\Setup.exe.

! Select Modem setup on the welcome page.

The install program checks the software configuration of Windows.

! Insert the Windows 98FE CD-ROM when Windows asks for it:

! Click on OK to continue.

When all Windows components are installed on your PC, the following screen appears:

User Guide - N56815740110

Page 3-36

eproduction or communication without the written consent of SAGEM SA

No r

1000 modem

1000 modem is carried out according

Table of Contents

F@st 1000