Weber Summit S-460 Installation Manual page 10

10
8
CAUTION: Use two people to lift and install the Summit
A) Lift the frame assembly into the "island" structure opening. Make sure the frame is resting level on the finished surface of the structure.
B) Adjust the Front Vent to rest squarely on ground.
ASSEMBLY
Built-In frame assembly.
®
1 24" (610 mm) Any Surface
a Grill Frame
Note: For a countertop treatment: Recommended 19.1 mm (3/4˝
b
inch) overhang. Notch front edge for frame to fully slide in.
CLE AR AN CES
WWW.WEBER.COM
®