HP CD-Writer Plus User Manual page 76

6-6
6. Select Create CD from the File menu when you have finished adding all
7. Make changes, if any, to the CD Creation Setup settings (see "CD
Pre-recording Audio Tracks to Wave Files
1. Insert the source CD, which contains the song you want to pre-record to
2. Click the Audio CD Layout tab in Easy CD Creator.
3. Select the audio track you want to pre-record from Explorer and drag it
4. Highlight the audio track in the Audio CD Layout window.
5. Select Pre-record to WAV file from the Track menu.
Making a Music CD
of the songs you want to record to your CD layout. The CD Creation
Setup box appears.
Creation Setup Settings" in the Easy CD Creator Online Help for
descriptions) and click OK.
Easy CD Creator will begin recording your CD layout to the blank CD.
An on-screen message notifies you when the recording is complete.
NOTE: To make a jewel case insert that lists the artist, CD title, and songs, see
"Chapter 7: Making Inserts and Labels."
Pre-recording audio tracks to Wave files on your hard drive is a way to:
Minimize swapping CDs in and out of your drive if you want to make
more than one copy, or if you have only a CD-Writer Plus drive
Add sound effects to customize any song on the CD (using a third-
party sound editor)
Improve the sound quality if your CD recording system is less than
optimal
You can pre-record one Wave file at a time. To pre-record a Wave file from
an existing CD, follow these steps:
your hard drive, into your CD-Writer Plus.
into the Audio CD Layout window.
NOTE: Pre-recording audio tracks to Wave files requires approximately 10MB
of space on your hard drive for one minute of music.