HP CD-Writer Plus User Manual page 17

1-8
9A. Set the jumper on the CD-Writer Plus as advised in the Install
Don't use
Cable Select
Installing a CD-Writer Plus in an Empty Drive Bay
Recommendation Printout for your computer (page 1-4).
Slave
Check the back of the new drive and
make sure the jumper is on the center
location (Slave).
This is a jumper. You can pull
it off and place it on another
pair of pins to change the setting.
or Master
Check the back of the new drive and
make sure the jumper is on the right-
hand location (Master).