Wireless Communication Switch - Toshiba Pockey PC e800 User Manual

The setting of this switch at shipment is "stop". When using the Toshiba
Pocket PC e800 for the first time, open the switch cover, then slide this
switch to the left (the "supply" side) with the stylus
Switching the battery switch to the "stop" position at any time will lead to
loss of data.
To turn on the battery switch:
1. Open Switch cover.
2. Slide the battery switch to the right.
Battery/Alarm LED
The Battery/Alarm LED indicates the machine condition
.
Flashing orange
Orange
Yellow
Green

Wireless Communication Switch

1. To enable Wireless module (Wireless LAN/Bluetooth models only),
make sure the Wireless Communication Switch is turned on. (The
default setting is Power Off. Open the switch cover, then slide the
switch to the left to turn the power on.) If the switch is on, a window will
pop up with a list of networks.
2. Select a network. On Windows Mobile 2003, if the switch is turned on, a
window will popup to show the list of existing networks you can join
User's Manual
Supply
When the preset alarm time, which was set
through Calendar or Tasks, goes off, the lamp
starts flashing.
Indicates charging of the battery.
The battery charging process is stopped due to
the ambient temperature being too high or low.
Charge the battery in an ambient temperature of
approximately 41°F to 104°F (5°C to 40°C).
Indicates full charge of the battery.
Basic Skills
Battery Switch
Switch Cover
Stop
2-4