Table of Contents
Advertisement
Wireless Communication Switch
1.
To enable Wireless module (Wireless LAN/Bluetooth models only),
make sure the Wireless Communication Switch is turned on. (The
default setting is Power Off. Open the switch cover, then slide the
switch to the left to turn the power on.) If the switch is on, a window
will pop up with a list of networks.
2.
Select a network. On Windows Mobile 2003, if the switch is turned
on, a window will popup to show the list of existing networks you can
join.
Wireless LED Descriptions
LED indicates the different status:
LED
Off
Orange
Hold Switch
When the Hold switch is on, Program Buttons 1 through 5, Cursor Button,
and Scroller will be disabled. The Hold switch icon
on the navigation bar. On the contrary, when the Hold switch is off, these
buttons will be enabled again.
Status
Wireless Communication Switch is turned OFF
Wireless Communication Switch is turned ON
Chapter 2: Basic Skills
Switch Cover
Wireless Communication Switch
will be displayed
23
Advertisement
Table of Contents
