Toshiba Pockey PC e800 User Manual page 216

Hide thumbs Also See for Pockey PC e800:
Table of Contents

Advertisement

Processing interrupted due to an internal error.
Cause
Solution Reset the Toshiba Pocket PC.
Error messages during File Transfer Protocol (FTP)
service
The FTP server could not be started because the FTP client is
operating.
Cause
Solution If you exit Bluetooth FTP on Local Device, the request from the
The FTP client could not be started because the FTP server is
operating.
Cause
Solution Exit Bluetooth FTP on Local Device. Once the Bluetooth FTP
Unable to delete (file/folder name)
Cause
Solution Remove the file or folder from the specified folder and try deleting
Unable to delete read-only file.
Cause
The selected file/folder already exists. Enter another file/folder name.
Cause
Solution Enter a different name.
Enter a file/folder name.
Cause
Solution Enter a correct name.
The following characters cannot be used in the file/folder name.
\ / ; , : * ? " < > |
Cause
Solution Rename the file/folder using correct characters.
Cannot rename file/folder.
Cause
Solution Enter a shorter name.
Enter the folder name.
Cause
Solution Enter a correct folder name.
User's Manual
The processing could not be continued due to an internal error.
A request to start the Bluetooth FTP server was received from a
peripheral device while the Bluetooth FTP client is operating on
Local Device.
peripheral device to start the Bluetooth FTP server can be
accepted.
You tapped the Bluetooth FTP icon to try to start Bluetooth FTP
while the Bluetooth FTP server is operating.
server is closed, start up Bluetooth FTP.
An error occurred while trying to delete a file or folder, or a sepa-
rate file or folder exists within the specified folder.
it again.
Local Device tried to delete a file on the remote device, but
because it is a read-only file, it could not be deleted.
The name you tried to enter already exists.
Either nothing has been entered for the name or the name con-
sists of spaces or begins with a period.
You entered an invalid character in the file/folder name.
A processing error occurred because the entered name
exceeded the maximum length.
After creating or changing a folder, either nothing has been
entered for the name or the name consists of spaces or begins
with a period.
Additional Information
12-18

Advertisement

Table of Contents
loading

Table of Contents