Toshiba Pockey PC e800 User Manual page 217

The following characters cannot be used in the folder name:
\ / ; , : * ? " < > |
Cause
Solution
The folder name could not be created.
Cause
Solution
The specified file could not be executed.
Cause
The connection destination server is not selected. Select a server.
Cause
Sending or receiving failed. Cancelling process.
Cause
Solution Try the operation again.
The memory was exceeded while receiving files. Cancelling process.
Cause
Solution Delete any unneeded data to increase the memory capacity, and
An error occurred during server search. Cancelling process.
Cause
Unable to obtain usable COM port. Ending program.
Cause
The OBEX password contains an invalid character. Enter the
password again.
Cause
Solution Use only alphanumeric characters when entering the password.
Unable to move folder or obtain folder information.
Solution Try the operation again.
Registry problem
Cause
There is no response from the partner device. Ending application.
Cause
Solution First exit Bluetooth FTP from Local Device.
An internal processing error has occurred. Cancelling process.
Could not allocate the memory for processing. Cancelling process.
Solution Delete any unneeded data to increase the memory capacity, and
User's Manual
You entered an invalid character in the new folder name.
Rename the folder using correct characters.
A processing error occurred because the entered name
exceeded the maximum length.
Enter a shorter name.
You selected Execute or Receive/Execute, but the specified file is
not executable or the associated application software could not
be found.
You have not selected the device to which you want connect.
Sending, receiving, deleting, or retrieval of folder information
failed.
The memory to store the files or folders was insufficient when
receiving or receiving/executing the files or folders.
try again.
Local Device tried to send or receive a file, but was unable to
connect to the remote device.
A COM port could not be opened during auto connect.
On the FTP Server screen of the remote device, when Tools and
Options were selected and the FTP authentication password
entered, an invalid character was used.
A problem occurred in the registry data required for processing.
Local Device tried to connect, disconnect, or perform a service
search, but there was no response from the remote device and a
time-out error occurred.
try again.
Additional Information
12-19