Toshiba Pockey PC e800 User Manual page 220

Graphical User Interface (GUI) Bluetooth terms
Authentication Status
Authentication
Auto Connect
■
■
COM Service Device
Connectability Mode
Connected Device
Connection Registration
Connection Status
Delete Ghost Device
Device Address
Device Class
User's Manual
For remote devices that have performed Bluetooth authentication,
Pairable is displayed. For unauthenticated devices, Untrusted is
displayed.
This is the process of confirming an authentication password to
allow a remote Bluetooth device to connect to Local Device. If the
authentication passwords on both devices do not match, the
connection is refused.
These are the following types of authentication:
■
Bluetooth
authentication
■
OPP authentication This is requested when trying to connect
■
FTP authentication This is requested when trying to connect
For a COM service, the program using COM is started and a
connection is established with the connection registered Bluetooth
device using the Serial Port Profile.
For a DUN service, Dial-up Networking is started and a connection
is established with the connection registered Bluetooth device using
the Dial-up Networking Profile.
This is a device that provides SPP (Serial Port Profile) service.
This setting determines whether Local Device can be connected to
by other Bluetooth devices in response to a connection request.
This is a remote device that currently has a Bluetooth connection to
Local Device.
This function is used to register an automatic connection.
This displays the current connection status (Connected,
Discovered, or Ghost) of Bluetooth devices.
This function is used to delete ghost devices from the device list.
This is the unique address given to each Bluetooth SD Card.
This indicates the type of Bluetooth device (desktop computer, cell
phone, etc.). A Bluetooth SD Card is categorized as a PDA.
This is requested when trying to establish
a Bluetooth connection with a remote
device. You must enter the Bluetooth
passkey to connect.
to a remote device to send all contacts by
OPP service. You must enter the OPP
password.
to a remote device to start FTP service.
You must enter the FTP password.
Additional Information
12-22