Making A Profile - Hasselblad H1D User Manual

Fill flash: normal flash (-1.7EV), autofocus (single), single drive, autoexposure, average me-
tering.
Access them by clicking on the PROFILES button when in the standard screen. e profile
screen appears and the required profile selected by scrolling the list and loaded to implement
the saved settings.
!
All user profiles can be restored to factory default settings by holding down the MENU
and DRIVE buttons with the battery attached

Making a profile

1) Activate the camera and go through the various settings ( for example, autofocus, aper-
ture priority, fill flash exposure compensation, etc.) you require for the particular purpose
and save them as you go.
2) When all the required settings have been made, click the PROFILES button on the grip
once and the profile screen will appear.
3) Use either the front or rear control wheel to scroll through the list of profiles. Pick a profile
name you want to change (except Standard), press SAVE.
4) The Profile name screen is then displayed where you can rename the profile to what suits
you (see section Imprint / Text 4.2.2 further on in this manual for procedure details).
5) Press SAVE to keep the combination of settings with the new name.
To use a profile from the standard screen, press the PROFILES button to reach the profiles
screen again. Scroll down the list to the profile you want and then press the Load (AF) but-
ton. All the saved settings will then be automatically implemented.
121
Hasselblad H1D