Changing A Profile Name - Hasselblad H5D User Manual

 
USING PROFILES
1) From the main screen, click
profile screen will appear.
2) Use the scroll bar to go through the list and highlight the
desired profile.
Load
3) Press (AF button). The camera is now set according to
all the parameters stored according to the name.
 

CHANGING A PROFILE NAME

You can change a profile name (except 'Default') at any time.
1) From the main screen, click
on the grip and the profile screen will appear.
2) Scroll through the list (front or rear scroll wheels) and
highlight the desired profile.
3) Press Load (AF button).
PROFILES
4) Click (ON.OFF button) again.
Save (ISO/WB button) The Profile name screen is
5) Press
then displayed where you can rename the profile to what
suits you (see under Image Info 4.2).
PROFILES on the grip and the
PROFILES
(ON.OFF button)
To quickly reset all profiles back to the original factory settings:
1. Remove battery.
2. Wait 5–10 seconds.
3. Replace the battery while keeping both the Menu and IS0/
WB buttons pressed.
T i p
84
AF
SAVE
PROFILES