Table of Contents
Advertisement
92
Hasselblad H1D
A
B
!
Ensure you press on the centre of the button, not on the lever.
!
You cannot remove a magazine if the darkslide is not closed.
!
If the film holder is inadvertently removed mid-film, then exposed frames will naturally
be lost due to light fogging. However, if the film holder is quickly re-inserted, the film will
automatically be advanced by three frames to position fresh unexposed film. The film
counter will also correspondingly add on three frames to the original number recorded
before the film holder was removed.
Magazine settings
Press the
button repeatedly to successively access:
A. Film speed (ISO / Bar Code)
C
B. Film length (120/220/ Number of frames)
C. Data (on/off)
D. Frame counter (count down / count up)
Film speed setting / Barcode
D
e film speed (ISO / ASA) can be set automatically or manually. Automatic setting uses a
Barcode (only some films have this feature). is is the default setting.
!
E
Film settings (ISO / film length) are automatic only if the magazine is set at Barcode
automatic. That is, a barcoded film cannot override a manual film speed setting but a
manual setting can override the film speed of a barcoded film.
A
Hide quick links:
Advertisement
Table of Contents
