Connecting An Antenna Or Cable Tv (No Box) - Dynex DX-19LD150A11 User Manual

10
DX-19LD150A11
Using coaxial cable (good)
To connect a cable or satellite box using coaxial cable:
1
Turn off your TV/DVD combo and all connected
equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the back of your TV/DVD
combo and to the coaxial out jack on the cable or
satellite box.
From cable TV
wall jack (75 ohm)
To Cable-in jack on the
cable TV or satellite box
Back of TV/DVD combo
4
Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5
Go through the setup wizard described on page 16.
Notes
• Use a coaxial cable to eliminate interference
and noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
P
B
P
R
Connecting an antenna or cable TV (no
box)
To connect an antenna or cable TV (no box):
1
Turn off your TV/DVD combo and all connected
equipment.
2
Connect a coaxial cable to the ANT/CABLE IN jack
on the back of your TV/DVD combo and to the
antenna or cable TV wall jack.
P
B
P
R
3
Turn on your TV/DVD combo, then go through the
setup wizard described on page 16.
Notes
• Use a coaxial cable to eliminate interference
and noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
Making connections
Back of TV/DVD combo