Connecting Cable Tv - Dynex DX-R20TR User Manual

DX-R20TR.fm Page 16 Thursday, January 18, 2007 3:19 PM
16
To connect separate VHF and UHF antennas (75 ohm VHF and 300 ohm UHF twin-lead
wires:
1 Connect the VHF 75 ohm cable and UHF 300 ohm twin-lead wires to the combiner (not
included).
RF IN jack
2 Attach the combiner to the RF IN jack on the back of your TV combo.

Connecting cable TV

To connect basic cable (no converter box):
• Connect the 75 ohm coaxial cable to the cable outlet and the RF IN jack on the back of
your TV combo.
75 ohm
coaxial cable
To connect a cable converter box:
1 Connect a 75 ohm cable from the cable outlet to the IN jack on the cable converter
box.
Incoming
cable
2 Connect a 75 ohm cable from the OUT jack on the converter box to the RF IN jack on
the back of your TV combo.
Combiner
UHF 300 ohm
twin-lead wire
Converter box
Setting up your TV combo
VHF 75 ohm
cable
RF IN jack
RF IN jack