Labeling An Input Source; Restoring Default Settings - Dynex DX-19LD150A11 User Manual

Restoring default settings

Labeling an input source

You can add a label to a video input source to make it
easier to identify. These labels are displayed on the INPUT
SOURCE list and on the banner that appears when you
press INFO.
To label an input source:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Settings. The Settings
menu opens. Press
menu.
3
Press or to highlight Input Labels, then press
ENTER/ .
Open Source Notice
Reset to Default
4
Press or to select the input source you want to
label, then press
or ENTER/ to access the
or ENTER/ .
5
Press ENTER/
keyboard. Press , , , or
character, then press ENTER/
character to the label. Repeat this step to add more
characters.
• Highlight Caps Lock, then press ENTER/
toggle the letter case from small to capital
letters.
• Highlight
character.
• Highlight Space, then press ENTER/
a space.
6
When the label you want has been entered,
highlight Enter, then press ENTER/
label to the input source.
7
Press EXIT to close the menu.
Restoring default settings
Caution
When you restore default settings, all the settings
(except the password and parental rating) you have
customized are reset.
Restoring default settings
To restore default settings:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Settings. The Settings
menu opens. Press
menu.
DX-19LD150A11
again to open the on-screen
to highlight a
to add the
then press ENTER/ to delete a
,
to insert
to assign the
or ENTER/ to access the
35
to