Dynex DX-19LD150A11 User Manual page 13

Making connections
Using component video cable (better)
To connect a cable or satellite box using component
video:
1
Turn off your TV/DVD combo and all connected
equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a component video cable (provided) to the
COMPONENT IN/Y, P
TV/DVD combo and to the component video out
jacks on the cable or satellite box.
Cable or satellite box
To Cable-in jack on the
cable TV or satellite box
P
B
P
R
4
Connect an audio cable (provided) to the L, R audio
jacks on the back of your TV/DVD combo and to the
audio out jacks on the cable or satellite TV box.
5
Turn on your TV/DVD combo, then turn on the cable
or satellite box.
6
Go through the setup wizard described on page 16.
7
To watch TV, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press
select Component, then press ENTER/
, P jacks on the back of your
B R
From cable TV
wall jack (75 ohm)
Back of TV/DVD combo
or
.
Using composite video cable (good)
To connect a cable or satellite box using composite
video:
1
Turn off your TV/DVD combo and all connected
equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect an A/V cable (not provided) to the VIDEO
IN/VIDEO 1, and L, R jacks on the back of your
TV/DVD combo and to the composite video and
audio out jacks on the cable or satellite box.
Cable or satellite box
4
Turn on your TV/DVD combo, then turn on the cable
or satellite box.
5
Go through the setup wizard described on page 16.
6
To watch TV, press INPUT to open the INPUT SOURCE
list, then press INPUT repeatedly, or press
select A/V, then press ENTER/
to
DX-19LD150A11
To Cable-in jack on the
cable TV or satellite box
Cables are often
color-coded to match
color-coded jacks.
Back of TV/DVD combo
P
B
P
R
.
9
From cable TV
wall jack (75 ohm)
or to