Answering A Call - Sharp GX22 User Manual

Answering a Call

When an incoming call is detected, the phone rings and
the mobile light flashes green.
1.
Open your phone.
Press D,
2.
or A [Answer] to answer the call.
Or press any key except F, C [Busy],
when the "Any Key Answer" function is enabled.
Set the Any Key Answer function in the profile of
each mode. (p. 134)
Tip
• When the hands free is connected to the phone and
the Any Key Answer function is enabled, you can
answer calls by pressing the side-up or side-down
key.
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller's network
sends the number, the caller's number is displayed on
the screen. If the caller's name and number are
stored in the Phonebook, the caller's name and
phone number are displayed on the screen.
• If the number is a restricted number, the display
shows "Withheld".
• When receiving a call from the person whose picture
is registered in the Phonebook, receiving display and
the picture are displayed alternately.
Rejecting an Incoming Call
You can reject a call you do not wish to answer.
Press F or press and hold the side-up or side-down
1.
key whilst the phone is ringing.
Letting the Caller Know You are Unavailable
You can send a busy tone to the caller of an incoming
and
call letting them know that you cannot answer the call.
Press C [Busy] whilst the phone is ringing.
1.
Call Functions 23