Sharp GX22 User Manual page 35

Press J for the vowel of the first letter, then press
2.
or to highlight "li".
Characters with the same reading are displayed in
the Candidate field.
3.
Press or until the desired character is
displayed.
4.
Press and hold corresponding numeric key to enter
the desired character (in this case, H).
Tip
• If a character contains two vowels (such as "ie"),
enter the second vowel after entering the first vowel.
For example, enter K, J and I to display "lie".
• When the cursor is placed behind the first character,
the Candidate field displays characters most likely to
follow.
Entering Characters 35