Answering A Call - Sharp GX-31 User Manual

e00_cover_7.book Page 26 Wednesday, March 10, 2004 6:22 PM

Answering a Call

When an incoming call is detected, the phone rings and
the mobile light flashes green.
1.
Open your phone.
Press D,
2.
or A [Answer] to answer the call.
Or press any key except F, C [Busy], c or d
when the "Any Key Answer" function is enabled.
Set the Any Key Answer function in the profile of
each mode. (p. 150)
Tip
• When the handsfree is connected to the phone, you
can answer calls by pressing the Answer button.
• When the handsfree is connected to the phone and the
Any Key Answer function is enabled, you can answer
calls by pressing the side-up or side-down key.
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller's network
sends the number, the caller's number is displayed on
the screen. If the caller's name and number are
stored in the Phonebook, the caller's name and
phone number are displayed on the screen.
• If the number is a restricted number, the display
shows "Withheld".
• When receiving a call from the person whose picture
is registered in the Phonebook, receiving display and
the picture are displayed alternately.
26 Call Functions
Rejecting an Incoming Call
You can reject a call you do not wish to answer.
Press F or press and hold the side-up or side-down
1.
key while the phone is ringing.
Letting the Caller Know You are Unavailable
You can send a busy tone to the caller of an incoming
call letting them know that you cannot answer the call.
Press C [Busy] while the phone is ringing.
1.