Table of Contents
Advertisement
Vibration
When the vibrator option is set on, the phone will
vibrate for incoming calls regardless of the ringer
volume and tone settings.
1.
Perform steps 1 to 4 in "Customising Profiles" on
page 129.
2.
Press
or
to highlight "Vibration", then press
to select.
3.
Press
or
to highlight "Enable", "Disable" or
"Link to Sound", then press
Tip
• When the "Link to Sound" option is selected in step
3, the vibrator synchronises with your selected
melody to pulse in time with the melody. Please note
that not all melodies support the "Link to Sound"
option. Should you select such a melody, only the
"Enable" option in step 3 will allow vibrator
function.
• When you select "Enable" or "Link to Sound" in step
3, "
" is displayed on the stand-by screen.
to select.
Keypad Tones
When the keypad tone is set on, you will hear a
confirmation tone each time you press any keys.
1.
Perform steps 1 to 4 in "Customising Profiles" on
page 129.
2.
Press
or
to highlight "Keypad Tones", then
press
to select.
3.
Press
or
to highlight "On" or "Off", then
press
to select.
If you select "Off", the screen returns to step 1.
4.
Press
or
to highlight "Volume", then press
to select.
5.
Press
to increase the volume or press
decrease the volume, then press
6.
Press
or
to highlight "Tone", then press
to select.
7.
Press
or
to highlight either "Preset
Melodies", "Sound Gallery" or "Default Tone",
then press
to select.
If you select "Preset Melodies" or "Sound Gallery" in
step 7, perform the following, otherwise go to step 9.
to
.
Profiles
131
Advertisement
Table of Contents
